Toner Cable D12 Digital Satellite Receiver - Manual (Page 65)

57 Appendix A
Safety & Care
Cables & Connections
Best Video: S-Video Jack and Cable
S-Video jacks and cables provide the best picture quality. You will still need to connect the left and right
audio cables to the TV or stereo, because the S-Video cable only carries the picture signal, not sound.
Audio/Video (A/V) Jack and Cable
Audio/Video (A/V) cables provide very good picture quality and stereo sound, and should be used if
your TV does not have S-Video jacks. The DIRECTV Receiver’s A/V jacks are color coded (yellow for
video, red for right audio and white for left audio). If your TV has only one input for audio (mono),
connect it to the left (white) audio jack on the DIRECTV Receiver.
RF Jack and Coaxial Cable (F-type)
RF jacks and coaxial cables provide good picture and mono sound quality. They should be used if A/V
connections are not available on your TV. RF jacks are used to connect to your TV and satellite dish,
off-air antenna and cable feed connections. The RF jacks on the receiver are labeled SATELLITE IN,
OFF-AIR IN and OUT TO TV. Note: Be sure to use RG-6 coaxial cable when connecting from the
satellite dish to the DIRECTV Receiver.
S-Video Jack
L R R Video
RF Jack
D12_MUG.indb 57 D12_MUG.indb 57 11/1/06 5:52:37 PM 11/1/06 5:52:37 PM