Rough Country 794 - Manual (Page 2)

1. Remove the 2 bolts in the front of the gas tank skid plate 18mm. See Photo 1.
2. Remove the bolt from the side of the frame 18mm. See Photo 2.
3. Remove the bolt from the inside of the of the gas tank pocket 18mm and remove the factory skid plate.
4. Raise the new Rough Country skid plate up and support with jack stands. See Photo 3. Install the 2 bolts in the front of the skid
plate and the stock bolt in the outer frame mount. See Photo 4.
5. Insert the stock bolt on the frame side of the skid plate and tighten with a 18mm socket. See Photo 5.
6. Remove the inside gas tank bolt from the jeep with a 18mm socket and install the correct mounting bracket. Hand tighten stock
bolt. See Photo 6.
PHOTO 5
PHOTO 1
PHOTO 4
PHOTO 2
PHOTO 3
PHOTO 6