Rough Country PERF694 User Manual
Page 6
POST INSTALLATION
1. Check all fasteners for proper torque. Check to ensure there is adequate clearance between all rotating, mobile,
fixed and heated members. Check steering for interference and proper working order. Test brake system.
2. Perform steering sweep. The distance between the tire sidewall and the brake hose must be checked closely. Cycle
the steering from full turn to full turn to check for clearance. Failure to perform inspections may result in component
failure.
3. The
draglink
must be adjusted to center the steering wheel BEFORE the vehicle is driven. Failure to do so will
cause a computer error with the Jeeps traction control system and result in odd handling and poor performance.
4. An alignment by a certified alignment professional with experience in aligning lifted vehicles must be performed.
5. Readjust headlights to proper settings.
6. Check hardware after the first 500 miles and then every 1000 miles.
INSTALLING DEALER - it is your responsibility to install the warning decal and forward these installation instructions on
to the vehicle owner for review. These instructions should be kept in the vehicle for its service life.
Thank you for purchasing a Rough Country 3 1/4” lift for your Jeep JK.
Don’t forget to visit us on the web @ www.roughcountry.com for your Jeep needs.