Banks Power Dodge Trucks: (Diesel ’07 - 12 6.7L Cummins) Exhaust- Monster Exhaust, Split-Dual Quad Tip ,side exit '07-09 Including Mega Cab User Manual
Page 10
10
96477 v.4.0
17.
With everything positioned
properly, begin to tighten the clamps
starting with the ones closet to the
turbo and working your way back.
Evenly torque the exhaust clamps to
35 ft-lbs. Make sure that each slip is
fully inserted (+/-
1
⁄
4
inch).
18.
Remove the protective covering
from the tailpipe tips.
CauTIoN: The protective covering
may ignite and burn if not
removed prior to running the
engine.
19.
Your system includes two (2)
Banks power logos. The logos can
be mounted
1
⁄
2
” to 1” above the
“cummins Turbo Diesel” emblem on
the driver-side and passenger-side
front fenders.
20.
Re-connect battery terminals if
previously removed. Start the engine
and listen for exhaust leaks. Tighten
the exhaust clamps as necessary.
Whenever possible, tack weld slip
connections to prevent disengagement
is recommended.
21.
The Banks Monster Exhaust
installation is now complete.