Banks Power Chevy_GMC Trucks: Duramax LLY (Diesel ’04 - 05 6.6L) Speed Control- Banks Brake w_ Switch User Manual
Page 13
Advertising
97245 v.2.0
13
16.
Next, connect the 6-pin connector
on the Banks OBD II interface cable
to the 6-pin connector on the Banks
Brake wire harness.
17.
The RJ12 connector (phone like
connector) on the Banks Brake Wire
harness will be connected in the next
section to the Brake level selector
switch. Leave this wire loose for
connecting to Brake level switch.
18.
Go over all connection. Secure
the wire harness with the supplied ties
under the dash.
WARNING: Take care to keep any
cables away from the pedals
or where they could become
tangled.
-END, SECTION 1-
Figure 9
Advertising