Banks Power GM Motorhomes: (Gas ’01 - 10 8.1L Workhorse) Programmer- Ottomind Programmer '99-07 Chevy-GMC 4.8L, 5.3L, 6.0L, 8.1L Trucks '01-07 Chevy-GMC 8.1L WorkHorse Class A Motor Home - Manual (Page 5)

Warning: Do not unplug
the Banks OttoMind
Programmer while
uploading or downloading
a program. Doing so can
damage the vehicles ECM.
DisclaiMer: OttoMind must be
used with a factory tuned vehicle,
otherwise damage may occur. If
you are not sure about your vehicle
tune, contact Banks Technical
Service.
–IMPORTANT- Turn the ignition ON,
but DO NOT start the engine. Apply
the parking brake to turn off lights and
conserve the battery. (Not necessary
on some models that do not activate
parking lights when the ignition is
turned ON).
1.
Using the keypad, scroll up or
down to ‘PROGRAM’ and press the
‘ENT’ button on the keypad. See
Figure 3.
2.
Select ‘LOAD PROGRAM’ inside the
‘PROGRAM’ submenu and press the
‘ENT’ button. See Figure 4.
3.
Select desired tune to install and
press the ‘ENT’ button to continue
4.
Banks OttoMind will display
the Disclaimer. Read through the
disclaimer. You can choose to accept
the disclaimer and continue with the
tune by pressing the ‘Enter’ button or
press the ‘ESc’ button to reject and
exit.
5.
The programmer will ask you to
choose your vehicle type. Select
between a ‘Truck/SUV’ or ‘Motor
home’. Highlight your selection and
press the ‘ENT’ button to continue.
- For GM (8.1L) Motor Homes Skip to
Step 8.
Motor home models do not have
adjustable parameters.
- For Gas Chevy/GMC Trucks or a
Chevy/GMC SUV proceed to Step 6.
For All Trucks & SUVs
6.
In the ‘ADJUST OPTIONS’ screen
you may modify Limited parameters to
your tune by selecting ‘Adjust Options’
(advanced users only). Selecting ‘Skip
Options’ will use Stock values for your
tune.
The following parameters may be
modified:
-Tire Size
-Axle Ratio
-Speed Limiter
-Fuel Octane
Warning: engine Detonation
may occur if incorrect octane
Fuel is selected. Select the
correct fuel octane or damage
may result to your engine.
Warning only adjust/remove
speed limiter higher than stock
if your vehicle is equipped with
appropriately speed-rated tires.
note: adjustable parameters vary
by model and year range. see
Figure 15.
In the parameter menu. Scroll Up and
Down and press ‘ENT’ to select desired
parameter. Once in the parameter sub
Section 2
Backing uP the Factory tune anD installing tune
96343 v.6.0
5