Banks Power Jeep Trucks: (Gas ’07 - 11 3.8L) Exhaust- TorqueTubes system '07-09 3.8L Wrangler - Manual (Page 8)

8
96495 v.5.0
INSTALL BANKS TORqUe TUBe
PASSANGeR SIDe
31.
Locate Banks right side
TorqueTube and install the stock heat
shield using the stock fasteners.
32.
Locate the supplied Banks
exhaust manifold gasket. Align
the gasket to the passenger side
TorqueTubes. Install the TorqueTubes
and gasket assembly to the cylinder
head. Retain the TorqueTubes with six
(6) of the supplied 8mm bolts. Torque
the 8mm bolts to 20 ft-lbs.
INSTALL FACTORy y-PIPe
33.
Reinstall the factory driver side
and passenger side Y-pipe to the
TorqueTubes using the supplied 3 ⁄
8
”
bolts, 3 ⁄
8
” washers and crimp lock nut.
Evenly torque the 3 ⁄
8
” hardware 32
ft-lbs. See Figure 4.
Figure 4 Driver Side Torque Tube/ Y-pipe installation