Banks Power Nissan Trucks: (Gas ’04 - 11 5.6L Titan) Exhaust- Monster Exhaust, Single Passenger side exit '04-09 - Manual (Page 7)

97058 v.7.0
7
12.
Install a 3” clamp on the Banks
Muffler outlet. From the vehicle rear,
route the tailpipe over the rear end.
Start the front tailpipe hanger pin
into the corresponding vehicle rubber
hanger. Install tailpipe into the Banks
Muffler.
For systems 48120 & 48122 skip to
step 15
Steps 13-14 Are For the Installation
of System 48123
13.
Align the factory rubber hanger
onto the Banks hanger plate (53972)
and secure with the supplied 5 ⁄
16
”
bolts, nuts and washers (see Figure
4B).
Figure 2