Notice to installer – Banks Power Dodge Trucks: (Diesel ’94 - 98 5.9L Cummins) Powertrain- Banks Billet Torque Converter (94-07) For use w_ 47RE and 48RE Trans User Manual
Page 5
Tools Required:
•
3
⁄
8
” and
1
⁄
2
” drive ratchets with
metric sockets including
1
⁄
2
” and
3
⁄
8
”
drive extension
• Metric combination or open-end
wrenches
• Standard and Phillips head
screwdrivers
• Standard and needle-nose pliers
• Clean shop towels or rags
• Transmission hoist
• Floor jack
• C-clamp
• Drain pan
• MOPAR ATF (See manufacturers
recommendations for your specific
model)
• 320-400 grit sandpaper
• Measuring ruler
• Pry bar or channel lock pliers
• Grease pen
• Inch-pound and foot-pound torque
wrenches
• Barring Tool (available from Banks
p.n. 97007)
Highly recommended tools and
supplies:
• Penetrating oil or light lubricant
spray
• For 4x4 models: Second
transmission hoist
• Transmission fluid filter
• Transmission pan gasket
Notice To Installer:
banks recommends replacing your
transmission fluid, transmission fluid
filter and transmission pan gasket.
Failure to service transmission may
result in torque converter damage.
96730 v.7.0
5