Wilwood SC1 Single Piston - Manual

4700 Calle Bolero • Camarillo, CA 93012 • www.wilwood.com • Sales: 805 / 388-1188 • Fax: 805 / 388-4938
114 02-01-08
SC CALIPER SERIES
3.00 (76,2)
MOUNT CENTER
DISC
DIAMETER
6.50 (165,1)
9.00 (228,6)
"E"
OUTSIDE RADIUS
4.32 (109,7)
5.57 (141,5)
.72 (18,3)
MOUNT OFFSET
2.36
(59,9)
.81
(20,6)
.19 (4,8)
DISC WIDTH
"D1"
DISC/WHEEL CENTERLINE
"E"
OUTSIDE
RADIUS
TOP OF FRICTION
MATERIAL AND DISC
O.D. TO BE FLUSH
DIMENSION "D1" = (DISC DIAMETER/2) + .09 (2,3)
CALIPER MOVES INWARD AS PAD WEARS, .15 (3,8) MAX
.67 (17,0)
MOUNT
HOLE
.09 (2,3)
MOUNT
HEIGHT
4.20 (106,7)
Caliper Highlights:
Designed, engineered and manufactured in the U.S.A., this floating die
cast aluminum caliper is a strong, compact, inexpensive answer to the
braking needs of recreational, agricultural and industrial vehicles.
Features of this single piston design include availability of either 1.06”,
1.19” or 1.25” bore size, fitted dust seal to prevent ingress of
environmental contamination, dual bleed fittings for versatility in
mounting position and fluid inlets in M10 x 1.0 banjo.
The mounting system features corrosion resistant slide pins floating in
viscoelastic rings mounted in the ears of the body for smooth,
rattle-free operation. This system controls pad knock-back to retain a
consistent pedal or hand lever feel throughout the life of the pads.
Weight: from 1.1 pounds. Rotor thickness range: .15” to .25”
ORDERING INFORMATION:
SC CALIPER SERIES, MOUNTING DIMENSIONS:
BORE SIZE DISC WIDTH MOUNTING PART NUMBER
1.25” 31,8 mm .15” - .25” 3.8 - 6,4 mm 3.00” 76,2 mm 120-9851 - SC1
1.19” 30,2 mm .15” - .25” 3.8 - 6,4 mm 3.00” 76,2 mm 120-7183 - SC2
1.06” 26,9 mm .15” - .25” 3.8 - 6,4 mm 3.00” 76,2 mm 120-8787 - SC3
3.75 (95,2)
1.54 (39,6)
.27
(6,9)
SC SERIES CALIPER PAD, PAD DIMENSIONS AND ORDERING INFORMATION:
PART NO. PAD DESCRIPTION
150-7644 SC CALIPER PAD
150-7646 SC CALIPER PAD
WITH SHIM