Daystar KF09111BK User Manual
Page 3
5
Installation steps
1.
Put the transmission in park or 1st gear for ( manual transmis-
sion ) and chock rear tires. Jack the front of the vehicle in ac-
cordance to manufacture recommendation and support with jack
stands, so the front two tires are off the ground.
2.
Remove the two front tires/wheels.
3. Disconnect the brake line from the strut tower.
Sway bar
Brake line
Brake line bracket
Loosen step 7
6
4.
Separate the upper ball joint from the spindle. Use a ball
joint separator or other suitable tool.
5.
Remove the 3 upper strut mounting nuts on the top off the
6.
Loosen the lower strut bolt and nut and push the upper
control arm up and pull the strut toward you.
7.
Apply the thread lock to the (3) strut studs and install the
stud extenders and tighten down.
Separate
Remove 3 nuts
Stud extenders