Nemco Food Equipment PowerKut Food Cutter - Operations Manual - Manual (Page 2)

NEMCO FOOD EQUIPMENT 301 Meuse Argonne, Hicksville, OH 43526
Phone: (419) 542-7751 Fax: (419) 542-6690 Toll free: 1-800-782-6761
www.nemcofoodequip.com
2
46015-R
6-02-2011
SERVICE INSTRUCTIONS
TO CONVERT
To change from one cutting style to another, simply remove the FACEPLATE AND BLADE ASSEMBLY by removing the WING NUTS
and THUMB SCREWS and replace it with the desired assembly.
TO REPLACE THE CENTER SCREW
Turn screw clockwise to remove and replace by turning counter clockwise (left hand thread).
TO REPLACE THE SEPERATING BLADE
Remove the CENTER SCREW per the above instructions then remove the holding screw (counter clockwise). Replace BLADE by
reinstalling both screws.
TO REPLACE THE BLADES
Remove screws counter clockwise, replace blades and reinstall
TO REPLACE THE DRIVE PLATE
Turn the DRIVE PLATE counter clockwise to remove, clockwise to install. Grip the hexagonal shoulder with a wrench and turn with
a sudden sharp force.