Nemco Food Equipment Easy Chicken Slicer - Spec Sheet - Manual (Page 2)

Suggested Uses:
If your operation is trying to maximize the
exploding popularity of chicken salads, sand-
wich wraps and chicken strip meals, this is the
tool you need. It quickly and easily cuts through
chicken and other tender cooked meats. Nemco’s new Easy Chicken Slicer ™ cuts breaded and other cooked chicken
breast much faster, more consistently and with much greater portion control
than the conventional knife-in-hand method. Plus, with a unique
assembly of unsharpened blades, it improves safety too.
For the freshest menu items and the tastiest profits, put Nemco to work
in your kitchen.
Rapid ROI
Designed to slice quickly and consistently with virtually no employee
training, the Easy Chicken Slicer goes right to work on cutting your labor.
And with its rugged, compact aluminum and stainless steel construction,
it’s built to keep paying dividends for years.
Improved Safety
Even the most inexperienced employees can be master handlers of the
Easy Chicken Slicer. It’s extremely easy to operate—with a low base for
stability—and virtually injury-proof. The intentionally unsharpened
blades cut right through the meat.
Easy Cleanup
The Easy Chicken Slicer is portable, and disassembly is as simple as
pulling a pin. Plus, the stainless steel pusher block and the blades
are specially designed to minimize lodging of chicken meat.
One Slicing Tool
That’s Anything But Dull
Model Description
55975 Easy Chicken Slicer, 1 ⁄ 2
" cut
55975-1 Easy Chicken Slicer, 3 ⁄ 8
" cut
55975-2 Easy Chicken Slicer, 1 ⁄ 4
" cut
55868 Blade Assembly, 1 ⁄ 2
" cut
55868-1 Blade Assembly, 3 ⁄ 8
" cut
55868-2 Blade Assembly, 1 ⁄ 4
" cut
Scalloped blades
55975-SC
Easy Chicken Slicer, 1 ⁄ 2
" cut
55975-1SC Easy Chicken Slicer, 3 ⁄ 8
" cut
55975-2SC Easy Chicken Slicer, 1 ⁄ 4
" cut
55868-SC Blade Assembly, 1 ⁄ 2
" cut
55868-1SC Blade Assembly, 3 ⁄ 8
" cut
55868-2SC Blade Assembly, 1 ⁄ 4
" cut
Dimensions
Cut size— 1 ⁄ 2
" thick slice (1.27 cm)
3 ⁄ 8
" thick slice (0.95 cm)
1 ⁄ 4
" thick slice (0.64 cm)
Width x depth—6 3 ⁄ 4
" x 13 1 ⁄ 2
" (17.2 cm x 34.3 cm)
Handle height
• Pusher block up—16
1 ⁄ 2
" (41.3 cm)
• Pusher block down—6 1 ⁄ 4
" (15.9 cm)
Space for a pan
• Between counter surface
and blade block—2 3 ⁄ 4
"
• From inside front bumper feet
to inside back suction cup feet—11"
Unit Weight
Actual—9 lbs. (4.1 kg)
Shipping—10 lbs. (4.6 kg)
Replacement parts are available through
Nemco’s 24-hour Zip Program.
Nemco reserves the right to make design,
specification or model changes without notice.
Blade assembly is easy to remove, clean
and replace—with no specific orientation
required (except scalloped models, which
cannot be turned upside down).
Rubber bumpers
on pusher block
dampen sound
during operation.
Sturdy base features a
low center of gravity
for better stability.
Designed to provide
leverage, the pusher
block is easy to actuate.
Unsharpened stainless steel
blades get the job done—safely.
Space under the blades
will accept a 2
1 ⁄ 2
"-tall,
half-size pan.
Suction cup feet secure
unit to work surface.
Nemco ® Food Equipment, Ltd.
301 Meuse Argonne
Hicksville, Ohio 43526
1.800.782.6761
419.542.7751
419.542.6690, fax
www.nemcofoodequip.com
“Exceeding you r expectations”
8/10. Printed in the U.S.A.