Turbosmart BOV ADAPTERS - Nissan 180SX – SR20DET User Manual
Page 2
SILVIA / 180SX-SR20 BLOW-OFF VALVE ADAPTOR INSTRUCTIONS
Head Office: Turbosmart Pty Limited, PO Box 264 Croydon, NSW, 2132 Australia
Ph: +61(2) 9798 2866
Fax: +61 (2) 9798 2826
Email:
USA Office: Turbosmart USA, 1185 Park Center Drive, Suite Q, Vista CA 92081 USA
Ph: (760) 727 7610
Fax: (760) 727 7963
Email:
PART NUMBER
FG-ADM-180SXSR
FG-ADA-
asfsdfdfsdfsdfsdf180
SR2srSRSX2020S20R
20
Step 3. Insert the SR20 Adaptor between the engine-
manifold pipe and the intercooler pipe.
Step 4. Use the 70mm new hose clamps supplied to
secure the factory hoses to the SR20 Adaptor pipe.
Tighten the hose clamps with a 7mm socket or
screwdriver.
Step 5. Locate the intake manifold fitting connected to the factory boost/vacuum line. It is on the left hand side of the
engine bay. Remove the factory boost/vacuum line to show the intake manifold fitting.
Step 6. Connect the Pre-assembled tee-piece and silicon hose assembly as shown in the diagram below:
Location of the intake
manifold fitting