Moog Music Little Phatty Stage II - Manual (Page 39)

Page 40
LP Stage II User’s Manual - The User Interface
Page 41
LP Stage II User’s Manual - The User Interface
The seventh page of the Arpeggiator menu allows you to enable or dis-
able the Latch function. The Latch allows the Arpeggiator to keep repeat-
ing the arpeggio state when you remove your hands from the keyboard.
The Latch menu arms the Latch function the same way the Arpeggiator
ON/OFF menu arms the Arpeggiator. When the Latch parameter is
set to ‘ON’, the Latch can be activated from the front panel (to activate
the latch, you must be in PRESET Mode when the Arpeggiator is run-
ning - see Activating the Arpeggiator and Latch for more). When ‘OFF’ is
selected, the Latch is always off and cannot be activated accidently. To
enable/disable the latch function, use the CURSOR button to move to
the latch parameter field, then use the VALUE knob to change the latch
status.
The default value is ‘OFF’.
ARPEGGIATOR (Con’t):
C. SYSEX (System Exclusive) Menus
SysEx menus are a set of commands to transmit and receive selected presets, bulk dumps and firmware
dumps. To enable SysEx menus, press the CURSOR button. This will highlight the menu options shown
on the second line of the display. Once highlighted, use the VALUE knob to scroll through the menus. To
activate a command, press the ENTER button.
SEND CURRENT PRESET:
This option allows you to send the current preset (system exclusive
data format) for archiving a preset in the LP’s memory. This requires
another LP or computer with a MIDI interface and a program that can
accept a SysEx dump. You must enable the device that is to receive the
SysEx data. Once the remote device is enabled, press ENTER to start
the data transfer.
When ENTER is pressed, the LCD will briefly display the ‘SENDING
CUR PRESET’
message shown. When the operation is complete, the
display will return to the SYSEX menu.