Cobalt Digital COMPASS 9275 HD_SD-SDI Analog Audio De-Embedder - Manual (Page 28)

4-4 •••• Control and Monitoring 9275-4C / 9275-8C User Manual •••• (V 1.2)
Menu Item Parameters Description
OK
Invalid Format
Incompatible
Non-Sync Video
Group Not Present
Group Channel
Silent
Signal Status
Indicates when the channel is functioning
normally or if anomalies are detected
OK
Source Missing
Source Async
PCM-Silent
Audio Status
Group 4 Reduced
to 20bit
†
Indicates the status of the audio source
OK
Indicates that a valid reference source is
present
No Ref - Video
The following conditions are occurring:
• Card reference is set to Frame 1 or Frame
2
• A valid reference signal is not present
• Card has gone to Video Timing Mode
No Ref - Free Run
The following conditions are occurring:
• Card reference is set to Frame 1 or Frame
2
• A valid reference signal is not present
• A valid video signal is not present
• Card has gone to Free Run Mode
Signal
(Read-
only)
Reference Status
Invalid Format -
Video
Card has detected an invalid ‡ reference
format and has switched to Video Timing
Mode
† This parameter indicates that there are more than 3 groups of 24bit SD embedded audio sources.
‡ Refer to the section “Reference Compatibility” for a complete list of supported references.