Cobalt Digital COMPASS 9362 HD_SD-SDI Test Signal Generator - Manual (Page 29)

9362-OM (V4.1) 9362 PRODUCT MANUAL 3-3
Operating Instructions
Accessing the 9362 Card via Remote Control
DashBoard™ User Interface
(See Figure 3-2.) The 9362 function submenus are organized in DashBoard™
using tabs. When a tab is selected, each parametric control or selection list
item associated with the function is displayed. Scalar (numeric) parametric
values can then be adjusted as desired using the GUI slider controls. Items in
a list can then be selected using GUI drop-down lists.
Figure 3-2 Typical DashBoard Tabs and Controls
Accessing the 9362 Card via Remote Control
Access the 9362 card using DashBoard™ or Cobalt ® Remote Control Panel
as described below.
Accessing the 9362 Card Using DashBoard™
1. On the computer connected to the frame LAN, open DashBoard™.
2. As shown below, in the left side Basic View Tree locate the Network
Controller Card associated with the frame containing the 9362 card to be
accessed (in this example, “MFC-8320-N SN: 00108053”).
DashBoard Tabs
Typical Selection
List