Cobalt Digital COMPASS 9362 HD_SD-SDI Test Signal Generator - Manual (Page 36)

3
9362 Function Submenu List and Descriptions
3-10 9362 PRODUCT MANUAL 9362-OM (V4.1)
Embedded Audio Group 1/2 and 3/4 TSG Audio Controls
Selects the TSG audio source for each embedded
audio channel 1 thru 16 (Embedded Audio Groups 1/2
and 3/4) to be used when TSG is active.
• SD Audio Depth Allows option of using 24-bit audio data structure per SMPTE 272M,
§3.10.
Note: • If 24-bit depth is desired, make certain downstream equipment is
compatible with 24-bit SD audio data.
• Depth control setting applied here affects both Embedded Audio
Group 1/2 and 3/4.
• Group Enable When enabled (On), enables the embedding of the corresponding
embedded audio group (Embedded Audio Group 1 thru 4).
Group Enable buttons correspondingly enable or disable Embedded
Audio Group 1 thru Embedded Audio Group 4.
Disabling a group removes the entire group of embedded audio channels
while preserving the settings of the channels belonging to the group.
Note: These controls are only to be used with TSG audio, and only while
TSG is invoked. Manipulating these controls while the card is
passing input video will result in severe embedded audio
corruption.
Table 3-2 9362 Function Submenu List — continued