Cobalt Digital COMPASS 9212-EO 3G_HD_SD-SDI Fiber Transmitter - Manual (Page 35)

9211-OE, 9212-EO User Manual Menus •••• 4-5
Menu Item Parameters Description
OK
No Signal
Temp High
Temp Low
Rx Power High
Tx Power High
Rx Power Low
Tx Power Low
Tx Fault
Tx Disabled
Optical Module
Status
Not Detected
Indicates the status of the card Optical
Module
Optical Rx Power
(dBm)
#
Indicates the power consumption of the
Optical Module. This value is accurate
to ±3dB. ( 9211-OE only)
Signal
(Read-
only)
Optical Tx Power
(dBm)
#
Indicates the power consumption of the
Optical Module. (9212-EO only)
Setup Menus
Table 4.2 summarizes the Setup Menu options available in DashBoard.
Table 4.2 Setup Menu Items
Menu Item Parameters Description
Auto
The card automatically detects the
incoming data rate
Bypass The card does not reclock the input
270 Mbps The reclocker is set to 270Mbps
1.5 Gbps The reclocker is set to 1.5Gbps
Reclock Rate
3 Gbps The reclocker is set to 3Gbps
Checkbox is
selected*
The equalizer is always enabled
Enable Equalizer
Checkbox is
unselected The equalizer is disabled when the
card is in Bypass Mode
Checkbox is
selected*
The output is muted on loss of input
Setup
Mute on Loss of
Input
Checkbox is
unselected The output is not muted on loss of
input