Cobalt Digital COMPASS 9212-EO 3G_HD_SD-SDI Fiber Transmitter - Manual (Page 39)

9211-OE, 9212-EO User Manual Specifications •••• 5-3
9212-EO Technical Specifications
This section provides the technical specifications for the 9212-EO.
Table 2. 9212-EO Technical Specifications
Category Parameter Specification
Number of Outputs 1
SMPTE Standards
Accommodated SMPTE 259M-C, SMPTE 292M, SMPTE
424M
Nominal Wavelength 1310nm
Output Power -7dBm to -2dBm
Optical Outputs
Connector Type Single Mode, LC/UPC
Number of Inputs 1
SMPTE Standards
Accommodated SMPTE 259M-C, SMPTE 292M, SMPTE
424M
Impedance 75ohm terminating
Return Loss
>15dB to 1.485GHz
>10dB from 1.485GHz to 2.97GHz
Cable Length with Equalizer
> 300m of Belden 1694A cable @ 270Mbps
> 120m of Belden 1694A cable @ 1.485Gbps
> 80m of Belden 1694A cable @ 2.97Gbps
SDI Inputs
Connector Type BNC
Number of Outputs
Full Rear Module: 5
Split Rear Module: 2
SMPTE Standards
Accommodated SMPTE 259M-C, SMPTE 292M, SMPTE
424M
Impedance 75ohm
Return Loss
>15dB to 1.485GHz
>10dB 1.485GHz to 2.97GHz
Signal Level 800mV ±10%
DC Offset 0V ±50mV
Rise and Fall Time (20-80%)
700ps. Typical (270Mbps)
120ps. Typical (1.485Gbps, 2.97Gbps)
Overshoot <10%
SDI Outputs
Connector Type BNC
Environment Operating Range 0°C to 40°C
Power Power Consumption <4W