Frame sync submenu, Display submenu – Cobalt Digital COMPASS 9032 HD_SD 12-bit Analog to Digital Converter User Manual

Page 14

Advertising
background image

Page 14 of 26

9032 Owner’s Manual

••••

(V 2.1)

Frame Sync Submenu

Menu Structure

Parameter Type

Enbl

Frame Sync Enable

HOS

Horizontal Offset

VOS

Vertical Offset

LATL

Line Latency

LATF

Field Latency

ADLY

Audio Delay

FS

RSET

Frame Sync Reset

Frame Sync Enable

Enables the frame sync. If disabled the output video timing matches the input video timing.

Horizontal Offset

Allows the user to specify an additional horizontal offset between the output video and the frame sync
reference in sample clock periods. These are sample clocks in the reference format, not the output
video format. For example, if using SD black burst to time 720p59.94 video each sample clock is 37ns,
not 13.5ns.

Vertical Offset

Allows the user to specify an additional vertical offset between the output video and the frame sync
reference in lines. These are lines in the reference format, not the output video format.****

Frame Latency

Specifies the smallest amount of latency allowed by the frame sync. This latency measurement is in
frames of the output video. The frame sync will not output a frame unless the specified number of
frames are captured in the buffer. Minimum latency is three lines and zero frames in all video modes.
The maximum latency is format dependent. The operational latency of the frame sync is always
between the specified minimum latency and minimum latency plus one frame (not one field).

Audio Delay

Specifies the amount of additional audio delay after matching video delay. When the change is under
one and a half frames, the change in audio delay will be applied without interrupting audio. When
changing audio delay more than a frame and a half at a time, there will be a slight audio glitch.

Video Delay

Reports the current amount of video delay in ms.

Reset Frame Sync

Resets the frame sync, clearing any buffered audio and video. You must reset the framesync after
manipulating the horizontal and vertical offset in order re-establish correct audio and video co-timing.

Display Submenu

Menu Structure

Parameter Type

Disp

H/V

Display Orientation

BRGT

Display Brightness

Advertising