Cobalt Digital COMPASS 9032 HD_SD 12-bit Analog to Digital Converter - Manual (Page 18)

Page 18 of 26 9032 Owner’s Manual •••• (V 2.1)
Menu Item Format Description
Framesync Enable On/Off
Enables the Frame Sync
Horizontal Offset 0-4125 samples
Applies additional
horizontal offset
Vertical Offset 0-1124 lines
Applies additional vertical
offset
Minimum Latency
Lines
3-1124 lines
Selects the minimum lines
of latency allowed.
Minimum Latency
Fields
0-27
Selects the minimum
fields of latency allowed.
Framesync Status On/Off/Error Shows the status of the FS
Frame Sync
Reset Framesync Confirm
Resets the FS and its
buffers. Re-establishes
audio video sync after a
adjusting the horizontal
and vertical offsets.
Menu Item Format Description
Mode –
Selects to either pass,
replace, or insert a
specified AFD code.
Code –
Allows the user to enter
an AFD code.
AFD
Line –
Allows the user to specify
the VBI line number
where the AFD resides.
Menu Item Format Description
Parameter Save Confirm
Saves the parameters as
preset.
Parameter Load Confirm
Loads parameters
previously saved.
Presets
Restart Parameters
to Factory Default
Confirm
Will load factory presets
and overwrite the save.
Menu Item Format Description
Composite
Y/C
YPbPr BetaCam
Video Signal
Controls SD Input Type
YPbPr MII
Selects the format of
input SD analog video, so
the decoder can properly
decode the signal.