Cobalt Digital COMPASS 9242 Analog Audio Distribution Amplifier with Remote Gain Control User Manual
Product manual
Advertising
Table of contents
Document Outline
- Introduction
- Installation
- In This Chapter
- Before You Begin
- Installing the 9242
- Cabling for the 9242
- Software Upgrades for the 9242
- To upgrade the software on a card
- 1. Contact Cobalt Digital Technical Support for the latest software version file.
- 2. Display the Device View of the card by double-clicking its status indicator in the Basic Tree View.
- 3. From the Device View, click Upload to display the Select file for upload dialog.
- 4. Navigate to the *.bin upload file you wish to upload.
- 5. Click Open.
- 6. If you are upgrading a single card, click Finish. Proceed to step 8.
- 7. If you are upgrading multiple cards:
- Click Next > to display the Select Destination menu. This menu provides a list of the compatible cards based on the card selected in step 3.
- Specify the card(s) to upload the file to by selecting the check box(es) for the cards you wish to upload the file to.
- Verify that the card(s) you wish to upload the file to. The Error/Warning fields indicate any errors, such as incompatible software or card type mismatch.
- Click Finish.
- 8. Monitor the upgrade.
- Monitor the upgrade progress bar displayed in DashBoard.
- The card(s) are automatically re-booted and temporarily taken offline during the re-boot process. The process is complete once the status indicators for the Card State and Connection fields return to their previous status.
- To upgrade the software on a card
- User Controls
- DashBoard Menus
- Specifications
- Service Information
- In This Chapter
- Troubleshooting Checklist
- Warranty and Repair Policy
- Cobalt Digital Inc. Limited Warranty
- This product is warranted to be free from defects in material and workmanship for a period of five (5) years from the date of shipment to the original purchaser, except that 4000, 5000, 6000, 8000 series power supplies, and Dolby® modules (where appli...
- Cobalt Digital Inc.'s (“Cobalt”) sole obligation under this warranty shall be limited to, at its option, (i) the repair or (ii) replacement of the product, and the determination of whether a defect is covered under this limited warranty shall be made ...
- This limited warranty applies only to the original end-purchaser of the product, and is not assignable or transferrable therefrom. This warranty is limited to defects in material and workmanship, and shall not apply to acts of God, accidents, or negli...
- To facilitate the resolution of warranty related issues, Cobalt recommends registering the product by completing and returning a product registration form. In the event of a warrantable defect, the purchaser shall notify Cobalt with a description of t...
- Cobalt Digital Inc. Factory Service Center
- 2406 E. University Avenue Office: (217) 344-1243
- Urbana, IL 61802 USA Fax: (217) 344-1245
- www.cobaltdigital.com Email: [email protected]
- THIS LIMITED WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES EXPRESSED OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND OF ALL OTHER OBLIGATIONS OR LIABILITIES ON COBALT'S PART. ANY SOFTWARE PROVID...
- COBALT'S LIABILITY, WHETHER IN CONTRACT, TORT, WARRANTY, OR OTHERWISE, IS LIMITED TO THE REPAIR OR REPLACEMENT, AT ITS OPTION, OF ANY DEFECTIVE PRODUCT, AND SHALL IN NO EVENT INCLUDE SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING L...
- In Case of Problems
- Contact Us
- Warranty and Repair Policy