TC Electronic BG250-210 - Manual (Page 17)

Operation – Rear Panel
13
ing background tracks. This feature is excellent for re-
hearsing or checking out new tracks without disturbing
the neighbors.
13. PRE/POST EQ button
Use the PRE/POST button located to the left side of
the BALANCED OUT jack to determine where in the
signal chain the signal for the balanced output should
be tapped.
■ PRE setting: The signal is tapped before the EQ and
the currently active TONEPRINT effect.
■ POST setting: The signal is tapped after EQ and the
currently active TONEPRINT effect.
14. BALANCED OUTPUT
Use the BALANCED OUT XLR jack to connect your
bass combo to the PA when you play on stage, or to
connect your amp to a recording device when you are
in the studio.
Operation – Rear Panel
This section describes the rear panel controls and ports
of your bass combo.
15