TC Electronic Shaker Vibrato - Manual (Page 8)

8
The controls
RISE TIME
Controls the time it takes for the vibrato to reach the specified depth. You can compare this to
activating the rotating speaker in an organ Leslie.
SPEED
The SPEED knob determines the time between the peaks of the vibrato.
DEPTH
Depth controls the intensity of the vibrato.
TONE
By adjusting the tone you change the effects emphasis on high and low frequencies. Turn the knob
fully clockwise and use the pedal in Latch mode (see below) to emulate a Leslie type effect.
VIBRATO TYPE selector:
The Vibrato Type selector allows you to select between the following types:
VIB
This is the regular mode. Here the BYPASS switch works as effect on/off.