Modifier sections – TC Electronic TonePrint Editor User Manual
Page 11
Modifier sections
■
Manual for software version 1 .0
9
Modifier sections
Use the parameters displayed in the right-hand-
side section of the TonePrint Editor window to set
the parameters that define your TonePrint .
This is the heart of your TonePrint – the place
where you define your sound.
Please note that what you are seeing here de-
pends on the type of TonePrint pedal connected .
With a modulation-only pedal, you will only see
the “Modulation” section . Reverb and delay ped-
als will also show a Modulation section, as de-
scribed in “Different pedals, different parameters”
If you have worked with effect processors (ei-
ther hardware or software) before, this part of the
TonePrint Editor window should look familiar . This
is an elegant, slider-based interface with a “what
you see is what you get” approach: Change a pa-
rameter, and both the display and what you are
hearing will immediately reflect the new setting .
In the following sections of this manual, we will
present and explain the parameters of the three
sections: Delay, Reverb, and Modulation .