Bypass modes, Technical specifications, Links – TC Electronic Hall of Fame Mini Reverb User Manual
Page 16
Hall of Fame Mini Reverb 14
Bypass modes
Here at TC, we have a simple philosophy: When
you are using one of our products, you should
hear something great – and if you don’t, you
shouldn’t hear it at all. This is why this pedal
sports True Bypass. When it is bypassed, it is
really off and has zero influence on your tone, re-
sulting in optimum clarity and zero loss of high-
end. Also please note that the pedal lets your
dry, unprocessed sound pass without ever con-
verting it to digital – keeping your original tone
pure and without any latency.
Technical specifications
– Stock default TonePrint:
TC Electronic Hall Reverb
– Bypass mode: True Bypass
– Signal Circuitry: Analog dry-through
– Dimensions (Width x Depth x Height):
48 x 48 x 93 mm / 1.9 x 1.9 x 3.7”
– Input Connector Type:
Standard ¼” jack – mono/TS
– Output Connector Type:
Standard ¼” jack – mono/TS
– Power Input:
Standard 9 V DC,
centre negative >100 mA (not supplied)
– Controls:
Reverb Level Knob: FX level
(knob assignment can be changed using free
TonePrint Editor software)
– Switch: FX On/Off
– Input Impedance: 1 MΩ
– Output Impedance: 100 Ω
Due to continuous development, these speci-
fications are subject to change without no-
tice.
Links
– The
TonePrint concept:
–
TonePrint apps
for your smartphone:
–
TonePrints
for Hall of Fame and
Hall of Fame Mini Reverb:
– TC
TonePrint Editor:
– TC
TonePrint Editor manual
(English):