Rainbow Electronics GM862-QUAD-PY - Manual (Page 35)

Easy GPRS User Guide
80000ST10028 Rev. 4 - 16/07/08
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 35 of 63
2.3 AT Commands Compatibility Table
Telit advises all clients that start a new application development with SW version 7.02.03 or higher to
use these new IP easy AT commands. Below you can find compatibility table for old and new
commands:
IPEasy old AT
commands
IPEasy new AT
commands
Operation
description
AT#SKTOP AT#SGACT; AT#SD socket open
AT#SKTD AT#SD socket dial
AT#SKTL AT#SL socket listen
AT#SKTSET not required
AT#SKTSAV not required
AT#GPRS AT#SGACT activation of
GPRS context
+++ after AT#SKTD +++; AT#SH
+++ after AT#SKTOP +++; AT#SH; AT#SGACT
socket close
AT#USERID AT#SGACT
AT#PASSWD AT#SGACT
authentication
AT#PKTSZ AT#SCFG
AT#DSTO AT#SCFG
AT#SKTTO AT#SCFG
AT#SKTCT AT#SCFG
socket
configuration
It is strongly recommended to not mix the new commands with the old ones.