Rainbow Electronics GT864-PY - Manual (Page 22)

GT864-QUAD/PY Hardware User Guide
1vv0300756 Rev.0 08/ 05/07
Reproduction forbidden w ithout Telit Communications S.p.A. w ritten authorization - All Rights Reserved page 22 of 23
10 Conformity Assessment Issues
The GT864-QUAD/PY Terminal is assessed to be conform to the R&TTE Directive as stand-alone
products, so If the module is installed in conformance with Dai Telecom installation instructions require
no further evaluation under Article 3.2 of the R&TTE Directive and do not require further involvement
of a R&TTE Directive Notified Body for the final product.
In all other cases, or if the manufacturer of the final product is in doubt then the equipment integrating
the radio module must be assessed against Article 3.2 of the R&TTE Directive.
In all cases assessment of the final product must be made against the Essential requirements of the
R&TTE Directive Articles 3.1(a) and (b), safety and EMC respectively, and any relevant Article 3.3
requirements.
The GT864-QUAD/PY Terminal
is conform with the following European Union Directives:
•
R&TTE Directive 1999/5/EC (Radio Equipment & Telecommunications Terminal Equipments)
•
Low Voltage Directive 73/23/EEC and product safety
•
Directive 89/336/EEC for conformity for EMC
In order to satisfy the essential requisite of the R&TTE 99/5/EC directive, the GT864-QUAD/PY
Terminal is compliant with the following standards:
•
GSM (Radio Spectrum). Standard: EN 301 511 and 3GPP 51.010-1
•
EMC (Electromagnetic Compatibility). Standards: EN 301 489-1 and EN 301 489-7
•
LVD (Low Voltage Directive) Standards: EN 60 950
In this document and the Hardware User Guide, Software User Guide all the information you may
need for developing a product meeting the R&TTE Directive is included.