Rainbow Electronics ATmega64C1 - Manual (Page 161)

161
7647A–AVR–02/08
ATmega32/64/M1/C1
Note: 1. The example code assumes that the part specific header file is included.
Assembly Code Example (1)
SPI_SlaveInit:
; Set MISO output, all others input
ldi r17,(1<<DD_MISO)
out DDR_SPI,r17
; Enable SPI
ldi r17,(1<<SPE)
out SPCR,r17
ret
SPI_SlaveReceive:
; Wait for reception complete
sbis SPSR,SPIF
rjmp SPI_SlaveReceive
; Read received data and return
in r16,SPDR
ret
C Code Example (1)
void SPI_SlaveInit(void)
{
/* Set MISO output, all others input */
DDR_SPI = (1<<DD_MISO);
/* Enable SPI */
SPCR = (1<<SPE);
}
char SPI_SlaveReceive(void)
{
/* Wait for reception complete */
while (!(SPSR & (1<<SPIF)))
;
/* Return data register */
return SPDR;
}