Bit timer/counter1, Overview, Attiny2313 – Rainbow Electronics ATtiny2313 User Manual

Page 83

Advertising
background image

83

ATtiny2313

2543A–AVR–08/03

16-bit
Timer/Counter1

The 16-bit Timer/Counter unit allows accurate program execution timing (event man-
agement), wave generation, and signal timing measurement. The main features are:
•

True 16-bit Design (i.e., Allows 16-bit PWM)

•

Two independent Output Compare Units

•

Double Buffered Output Compare Registers

•

One Input Capture Unit

•

Input Capture Noise Canceler

•

Clear Timer on Compare Match (Auto Reload)

•

Glitch-free, Phase Correct Pulse Width Modulator (PWM)

•

Variable PWM Period

•

Frequency Generator

•

External Event Counter

•

Four independent interrupt Sources (TOV1, OCF1A, OCF1B, and ICF1)

Overview

Most register and bit references in this section are written in general form. A lower case
“n” replaces the Timer/Counter number, and a lower case “x” replaces the Output Com-
pare unit channel. However, when using the register or bit defines in a program, the
precise form must be used, i.e., TCNT1 for accessing Timer/Counter1 counter value
and so on.

A simplified block diagram of the 16-bit Timer/Counter is shown in Figure 39. For the
actual placement of I/O pins, refer to “Pinout ATtiny2313” on page 1. CPU accessible
I/O Registers, including I/O bits and I/O pins, are shown in bold. The device-specific I/O
Register and bit locations are listed in the “16-bit Timer/Counter Register Description”
on page 105.

Advertising