Rainbow Electronics AT90S2313 User Manual

Features, Pin configuration

Advertising
background image

1

Features

Utilizes the AVR

®

RISC Architecture

AVR – High-performance and Low-power RISC Architecture

– 118 Powerful Instructions – Most Single Clock Cycle Execution
– 32 x 8 General Purpose Working Registers
– Up to 10 MIPS Throughput at 10 MHz

Data and Non-volatile Program Memory

– 2K Bytes of In-System Programmable Flash

Endurance 1,000 Write/Erase Cycles

– 128 Bytes of SRAM
– 128 Bytes of In-System Programmable EEPROM

Endurance: 100,000 Write/Erase Cycles

– Programming Lock for Flash Program and EEPROM Data Security

Peripheral Features

– One 8-bit Timer/Counter with Separate Prescaler
– One 16-bit Timer/Counter with Separate Prescaler,

Compare, Capture Modes and 8-, 9-, or 10-bit PWM

– On-chip Analog Comparator
– Programmable Watchdog Timer with On-chip Oscillator
– SPI Serial Interface for In-System Programming
– Full Duplex UART

• Special Microcontroller Features

– Low-power Idle and Power-down Modes
– External and Internal Interrupt Sources

• Specifications

– Low-power, High-speed CMOS Process Technology
– Fully Static Operation

Power Consumption at 4 MHz, 3V, 25°C

– Active: 2.8 mA
– Idle Mode: 0.8 mA
– Power-down Mode: <1 µA

I/O and Packages

– 15 Programmable I/O Lines
– 20-pin PDIP and SOIC

Operating Voltages

– 2.7 - 6.0V (AT90S2313-4)
– 4.0 - 6.0V (AT90S2313-10)

Speed Grades

– 0 - 4 MHz (AT90S2313-4)
– 0 - 10 MHz (AT90S2313-10)

Pin Configuration

PDIP/SOIC

8-bit
Microcontroller
with 2K Bytes
of In-System
Programmable
Flash

AT90S2313

Rev. 0839I–AVR–06/02

Advertising
Table of contents