Rainbow Electronics ATR0630 - Manual (Page 22)

22
4920A–GPS–01/06
ATR0630 [Preliminary]
The RTC section will be initialized properly if VDD18 is supplied first to the ATR0630. If VBAT is
applied first, the current consumption of the RTC and backup SRAM is undetermined.
Figure 4-2. Connecting Example: Common Power Supplies for RF and Digital Part Using the Internal LDOs
The USB Transceiver is disabled if VDD_USB < 2.0V. In this case the pins USB_DM and
USB_DP are connected to GND (internal pull-down resistors). The USB Transceiver is enabled
if VDD_USB within 3.0V and 3.6V.
ATR0630 internal
VDDUSB 0V or 3V to 3.6V
1.5V to 3.6V
ldoout
ldoen
ldoin
LDO18
LDO_IN
1 µF
(X7R)
VDDIO
LDO_EN
VDD18
LDO_OUT
USB SM and
transceiver
1.8V to 3.3V
variable IO domain
RTC
backup memory
Core
vbat18
vbat
VDD
ldobat_in
LDOBAT
LDOBAT_IN
VBAT
VBAT18
RF
VCC1
VCC2
VBP
VDIG
1 µF
(X7R)
NSHDN
2.7V to 3.3V