B&B Electronics 516TX-A - Manual - Manual (Page 18)

(Revised 8/4/2009) 18
CLI Tree of Menus
 info (Show identification data)
 SYSTEM (Open system menu)
nview (Get information about N-View function)
•
info (Get information about N-View)
•
enable/disable (Enable/Disable N-View)
aging (Aging Time for dynamically learned addresses)
•
info (Get information about Aging)
•
enable/disable (Enable/Disable Aging)
•
config (Configure Aging)
info1 (Get information about system - ports 1->8)
info2 (Get information about system - ports 9->16)
info3 (Get information about system - ports 17->24)
info4 (Get information about system - ports 25 & 26)
upwd (Set a user defined password)
restore (Restore factory defaults) **Note: Power cycle is required when completed.
 SWITCH (Open switch menu)
mirror (mirroring)
•
info (Get information about Mirroring)
•
enable/disable (Enable/Disable Mirroring)
•
config (Configure Mirroring)
trunking (Assign Port Trunking Groups)
•
info (Get information about Trunking)
•
enable/disable (Enable/Disable Trunking)
•
config (Configure Trunking)
qos (Quality of Service - traffic priority)
•
info (Get information about QOS)
•
en_tag/dis_tag (Enable/Disable Tagged QOS - 802.1p)
•
set_tag (Set Tagged QOS threshold - 802.1p)
•
en_port/dis_port (Enable/Disable Port QOS)
•
set_port (Set Port QOS - higher priority ports)
vlan (Virtual Local Area Networks)
•
info (Get information about VLAN)
•
enable/disable (Enable/Disable VLAN)
•
if tagged now:
•
untagged (Untagged pkt handling)
•
port (Switch to Port Based VLAN)
•
if port now:
•
tagged (Switch to Tagged VLAN)
•
group1 (configure tagged VLAN Group 1)
•
group2 (configure tagged VLAN Group 2)
•
group3 (configure tagged VLAN Group 3)
•
group4 (configure tagged VLAN Group 4)
•
group5 (configure tagged VLAN Group 5)
•
group6 (configure tagged VLAN Group 6)
•
group7 (configure tagged VLAN Group 7)
•
group8 (configure tagged VLAN Group 8)
•
cleargroups (clear all 8 tagged VLAN Groups)
(continued)