B&B Electronics VESR9xx - Fiber Models - Manual - Manual (Page 24)

Setup and Connections
www.bb-elec.com
www.bb-europe.com
18
1. From the Desktop, click StartProgramsB&B ElectronicsVlinx
Vlinx Manager VESR Serial Server
The Vlinx Manager Discovery window appears.
Figure 16. Vlinx Manager Discovery Window
2. Configure your serial server as required.
Note: For more information on configuration options refer to Section 4: Description of Serial
Server Properties.
CONFIGURING WITH THE WEB INTERFACE
VESR9xx Serial Servers can be configured over the network using a standard internet
brower such as Internet Explorer or Firefox.
To open the web configuration interface:
1. On a PC connected to the network, open a browser.
2. In the browser’s address bar, type the IP address of the serial server.
Note: Your serial server comes from the factory pre-configured to receive an IP address from
a DHCP Server. If DHCP assignment is not available it will default to 169.254.102.39
The web interface Login page appears.