B&B Electronics VESR9xx - Fiber Models - Manual - Manual (Page 50)

Appendix B
www.bb-elec.com
www.bb-europe.com
44
CONTROLS, INDICATORS AND CONNECTOR SPECIFICATIONS
Switches Reset button Hold in for 0 to 2 seconds for hardware
reset
Hold in for 2 to 10 seconds for Console
Mode (Do a hardware reset or recycle
power to exit Console Mode)
Hold in for more than 10 seconds to reset to
factory defaults
Indicators Serial LED
(one per port)
Color = Green
On = Port open
Blink = Data traffic
Link LED (VESR 90x)
E1 / E2 LED
(VER92x)
Color = Green
On = 100BaseTX
Off = 10BaseT
Blink = Data traffic
Ready LED Color = Green
Blink (once per second) = System OK
Off = System NOT OK
Connectors 10BaseT/100BaseTX
Ethernet
Single RJ-45F (8 pin)
SC fiber SC connector
ST fiber ST connector
Serial ESR901-x: one DB-9M connector
ESR902D-x: Two DB-9M connectors
ESR902T-x: Two pluggable lockable 5.08
mm terminal blocks
DC Power 5.08mm 2-position pluggable, lockable
terminal block