B&B Electronics I-7565-H2 - Quick Start Guide - Manual (Page 3)

I-7565-H1/H2 High Speed USB/CAN Converter Quick Start User Guide (Ver 1.0, Sep/2009) 3
3. Test I-7565-H1 by using I-7565-H1/H2 Utility
Step1: Set the Init / Normal switches on the back of the I-7565-H1 A and
B to the “
Normal
” position. Then, turn on the DC power. The PWR
LED of the I-7565-H1 A and B will be always turned on. It means
these two I-7565-H1 converters are working in the “Firmware
Operation” mode.
Step2:
Run the “I-7565-H1/H2 Utility”, I-7565-H1H2_Utility.exe, and
configure the connection parameters and then click “Connect”
button to connect to the I-7565-H1 A module like Figure 3-1.
Port No
: The Virtual COM Port Number (Port3 => Figure 3-2)
Mod Name
: The Module Name (I-7565-H1)
Port Enable
: Port 1 checked
Baud Rate
: 1000K bps
.
Figure 3-1
: Connection Screen of I-7565-H1/H2 Utility
Figure 3-2
: The Virtual COM Port Number