B&B Electronics VFG3000 - Manual User Manual
Page 84
E
DITING
M
ULTI
T
AGS
V
LINX
F
IELDBUS
G
ATEWAY
M
ANAGER
U
SER
M
ANUAL
P
AGE
68
property always acts to maintain an alarm once the alarm is activated, and not to
modify the point at which the activation occurs.
•
The remainder of the properties are as described for the Alarms tab of flag tags.
T
HE
T
RIGGERS
T
AB
The Triggers tab of an integer variable or formula contains the following properties...
•
The Trigger Mode property is as described for the Alarm tabs.
•
The Delay property is as described for a flag tag’s Alarms tab.
•
The Action property is used to indicate what action should be performed when
the trigger is activated. Refer to the Writing Actions section for a description of
the syntax used to define the various actions that Fieldbus Gateway Manager
supports.
E
DITING
M
ULTI
T
AGS
You will recall that multi tags represent a 32-bit signed value, but are used to select between
one of a number of text strings. The following sections describe the various tabs that are
displayed on the right-hand side of the Data Tags window when editing a multi tag.