Dual Electronics DXV3D - Manual (Page 31)

31
Bluetooth Operation
Receiving a Phone Call
Ending a Phone Call
Making a Phone Call
Using the Phonebook
Streaming Audio
Incoming phone calls will automatically appear on the display,
and a ring tone will be heard.
Press to receive the incoming call or to refuse the
incoming call.
During an active phone call, press to end a phone call. If
the phone call was received when listening to music in another
mode, the DXV3D will resume the previous mode.
Press to display the keypad and begin a phone call. Enter the
phone number using the 0-9 buttons on the keypad.
Note: Placing a phone call from your cell phone will also use the
Bluetooth function of the BTM100.
The BTM100 supports the PBAP Bluetooth profile to temporarily
download the phonebook of the cell phone. The contents of the
phonebook are deleted each time a cell phone is disconnected
and are not permanently saved. To use the phonebook for
making a call:
• Press the keypad button from Bluetooth mode with a
compatible cell phone connected. Press P-Book at the
bottom of the screen to display downloaded phone book
names.
• Press the desired name on the phone book, then select
between cell, home, work and other phone number types to
make a phone call.
The DXV3D supports A2DP wireless streaming audio from your
Bluetooth mobile device directly to the head unit. You can also
control music from the front panel of the head unit using AVRCP
(audio video remote control profile).
OPERATION