Dual Electronics XDMAR6720 - Manual (Page 25)

25
XDMAR6720 OPERATION
Connecting an iPod/iPhone Device
Controlling a Device: Full Control
To play music from an iPod/iPhone device using the direct
USB interface, connect the USB cable (included with your
iPod/iPhone device) to the XDMAR6720's USB port. Once
connected, playback will begin automatically.
Note: If a song is playing on the iPod or iPhone device before
it is connected, it will continue to play after being connected.
Press ll
to skip to the beginning of the next song. Press
nn
to return to the beginning of the current song. Pressing
nn
again skips to the beginning of the previous song.
Press and hold ll or nn
to fast forward or reverse a
song.
Press l / II to temporarily stop playback.
Press l / II again to resume playback.
Press RPT to enter the Repeat menu, then turn the volume
knob to select one of the following options:
• Off - Repeats all tracks.
• Current Song - Repeats selected track.
Press RDM to enter the Random menu, then turn the volume
knob to select one of the following options:
• Off - Cancels the RDM function.
• All Songs - Plays all tracks in random order.
• Current Album - Plays all tracks in the selected album in
random order.
Press INT to enter the Intro menu, then turn the volume
knob to select one of the following options:
• Off - Cancels the INT function.
• On - Plays first 10 seconds of each track.
Connecting an iPod
or iPhone Device
(sold separately)
Song Select
Fast Forward and
Reverse
Pause
Repeat
Random
Intro
When the control of iPod/iPhone feature is set to "FULL" in the setup menu, use the
following functions to control the device: