Important – Pace-Edwards Utility Rig Rack User Manual
Page 2
Read the instructions carefully before you start. These instructions are written for one-person installation. We
have noted where briefl y having an extra person’s assistance can make installation easier. If you have questions
regarding the installation please call our Technical Support Line at (800) 338-3697.
UTILITY RIG RACK
9/16” wrench or socket
1/2” open ended wrench
Flat clean surface (such as card board paper or plastic
Silicone sealant (if necessary)
2
TOOLS REQUIRED FOR ASSEMBLY:
BEFORE YOU START:
UTILITY RIG RACK ILLUSTRATION:
TRUSS CROSSMEMBER (x2)
SIDE STOPS (x4)
BRACES (x 4)
3/8” KNOB (x2)
LEGS (x4)
5” CARRIAGE BOLTS (x 12)
EXPLORER SERIES RAIL
(ORDERED SEPARATELY
WITH TRUCK BED COVER)
1” CARRIAGE BOLTS (x16)
5/16” STAINLESS LOCK
WASHERS & NUTS (x16)
3/8” LOCK NUT (x12)
IMPORTANT!
The Pace Edwards truck bed cover and Explorer Series Rails
MUST be installed on the truck fi rst before attempting to install this rack system!