Peterson AutoStrobe 490 - Manual (Page 10)

Page 8
DOWN
UP
OFF
ON
+
7
÷
SCREEN PARAMETER SETTING VALID RANGE: BUTTONS:
RUN (before
entering SETUP) Strobe Disc Band
DISPLAY +2 / -1 +2, -1, Normal, ...
Factory Default: Normal
DISPLAY
+2
—
-1
1st SETUP
parameter screen Concert A Pitch Reference
Recalibration
350 Hz to 550 Hz in 1 Hz
increments
Factory Default: A=440
3
4
2nd SETUP
parameter screen
Musical KEY Setting
C, B=, F, E=, ...
Factory Default: KEY=C
KEY
3rd SETUP
parameter screen Auto-Note Selection Mode
Setting OFF, ON
Factory Default: ON
3
4
Each press of the "1" button (labeled "NEXT") will sequence through screens for each of these parameters except for the
Strobe DISPLAY +2/-1 parameter which does not have a SETUP screen. Except for the Concert A pitch reference
recalibration, these parameters can be altered more directly from the RUN screen. However, altering the power-up state of
these parameters can only be effected under SETUP.
As each SETUP screen is accessed, the value of each parameter shown is the CURRENT state of the parameter as last altered
by any method: directly under the RUN screen, a previous access to the SETUP screens, or, if neither of these occurred, the
last power-up default settings. Conversely, any change to these parameters under a SETUP screen will be reflected
immediately upon exiting SETUP whether the changes were stored or not.
Continuing in order from the SETUP screen, the screen for recalibrating the Concert A pitch reference is accessed by
pressing the "1" button (labeled OPTN):
SETUP MENU
PLEASE SELECT MODE
OPTN FILE RUN DIAG
1 2 3 4
1
RECALIBRATE TUNER?
NOW A= XXX
NEXT RUN DOWN UP
1 2 3 4
Accessing the Concert A Recalibration Screen
As with all the SETUP parameter screens, an immediate escape to the normal RUN screen is an option if viewing or changing
a particular parameter is all that is desired. Hitting the appropriate value-altering buttons—in this case, buttons "3" and
"4"—will cause an immediate update of the LCD screen. Hitting the "1" button (NEXT) will activate the next parameter
screen:
L
L
L
L
L
L