PowerWalker ViewPower PowerWalker - Manual (Page 29)

28
5.1.4. Event Action Configuration
It’s to configure response actions for UPS events. Software provides six response
actions after events occur.
1. Event record: It will record event to data log in software after events occur.
This function is default selected.
2. Computer alarm: Computer will beep to remind users after events occur. This
function is only available for Windows OS.
3. Warning dialog (local): It will pop up a message dialog around the software
orange plug icon in taskbar after events occur. This function is default selected.
4. Broadcast: It will send the event message to all PCs with software installed in
LAN network.
5. SMS: It will send the event message to specific mobile phone numbers after
events occur.
6. E-mail: It will send the event e-mail to assigned e-mail accounts after events
occur.
Step 1 Select ViewPower Configuration >> Event Action. Refer to Diagram 5-6.
Diagram 5-6
NOTE: The displayed event list may be different for different types of UPSs.