PowerWalker Battery Pack for VI 1000_1500RT LCD - Manual (Page 22)

EN
UPS Status Display String Description:
The following table shows the description of the LCD display string:
Table4. UPS Status Display String
LCD Display String Description
STbY UPS work at Standby mode
IPVL Input voltage is too low
IPVH Input voltage is too high
IPFL Input frequency is too low
IPFH Input frequency is too high
NORM UPS work at Line mode
AVR UPS work at AVR mode
bATT UPS work at Battery mode
TEST UPS work at battery life/function test mode
OPVH Battery mode, the output is too high
OPVL Battery mode, the output is too low
OPST Output short
OVLD Overload
bATH Battery voltage is too high
bATL Battery voltage is too low
OVTP Internal temperature is too high
FNLK Fan is locked
bTWK Batteries are weak
User Setting String Description:
The following table shows the options that can be changed by user.
Table5. User Setting String
OPV Output voltage mode select
[220]= 220V
[230]= 230V
[240]= 240V
AVR Input type select
[000]= Normal range mode
[001]= Wide range mode
[002]= Generator mode
EbM
External battery module
(EBM) 0~9 is the number of external battery
module
TEST Auto self-test [000]=Disable [001]=Enable
AR Automatic restart [000]=Disable [001]=Enable
GF Green function [000]=Disable [001]=Enable
bZ Buzzer control [000]=Disable [001]=Enable
LS1 Load segment 1 [000]=Turn off [001]=Turn on
LS2 Load segment 2 [000]=Turn off [001]=Turn on