PowerWalker Battery Pack for VI 1000_1500RT LCD - Manual (Page 5)

EN
1. Introduction
This line-interactive series is compact and pure sine wave UPS and it is designed
for essential applications and environment, such as desktops, servers,
workstations, and other networking equipments. These models are available in
the output ratings of 1000VA
/
1500VA
/
2000VA/3000VA. The series protects your
sensitive electronic equipments against power problems including power sags,
spike, brownouts, line noise, undervoltage, overvoltage and blackouts.
The series is convertible to rack and tower forms. It can be placed either in Rack
2U or Tower form. The front panel of the UPS includes LCD display and four
control buttons that allow users to monitor, configure and control the units. On
LCD, it also includes a LCD graphical bar, two status indications and four alarm
indications. A control button from the front panel allows users to silence off the AC
fail alarm and initiate the UPS self test sequence as well. The UPS case for
1000VA
/
1500VA
/
2000VA/3000VA is made of metal. This series is powered from
the AC mains and supply AC outputs via receptacles on the rear panel.
Communication and control of UPS is available through serial or USB ports
located on the rear panel. The serial port will support communications directly
with a server and offer dry-contacts.
Features:
Microprocessor control guarantees high reliability
High frequency design
Built-in boost and buck AVR
Easy battery replacement design
Selectable input and output range
Cold start capability
Built-in Dry contact/RS-232/USB communication port
Optional SNMP module allows web-based remote or monitoring management
Enable to extend runtime with scalable external battery module(EBM)
Overload, short-circuit, and overheat protection
Rack/Tower 2-in-1 Design
19 inches rack mount available for all models