Peerless-AV DS-VW765-LAND - Installation - Manual (Page 11)

11 of 13 ISSUED: 2013-05-13 SHEET #: 145-9011-9 2013-06-25
8
Open adapter brackets ( B) by pulling down on the long cords while pulling bottom of display away from wall.
NOTE: Kick stand will automatically engage. Make sure kick stand is in down postion before resting the display.
NOTE: Extended position is for service access only. The mount must be closed during normal use and operation.
NOTE: Display not shown for clarity.
OPEN Adapter Brackets: LONG CORDS
B
B
CLOSE Adapter Brackets: SHORT CORDS
Slightly pull display away from wall to release kick stand while pulling down on short cords.
NOTE: Once short cords are pulled, kick stand will disengage.
NOTE: Support the display until the adapter brackets (B) are engaged in the closed position.
TO OPEN,
PULL DOWN LONG CORDS
TO CLOSE,
PULL DOWN SHORT CORDS
KICK STAND IN
DOWN POSITION
LONG CORDS
SHORT CORDS
KICK STAND