Peerless-AV DS-VWT955-2X2 - Installation - Manual (Page 5)

5 of 8 SHEET #: 125-9278-5 09-19-12
1. Locate the position of the lower horizontal rail (I) and attach to tilt brackets (A).
2. Use display height to determine location of upper horizontal rail (I),
NOTE: Lowest horizontal rail (D) position shown below.
NOTE: Horizontal rails (D) must be secured using sixteen 1/4-20 hex head type-F screws (N, step 6).
Determine position of horizontal rails ( I) using the formula below.
6
5
Detail 6
Detail 7
Attach adapter supports ( I) to tilt brackets (A) using sixteen 1/4-20 hex head type-F screws (N) with sixteen
1/4’’ washers ( T), and sixteen 1/4-20 nylock nuts (O) in a diagonal pattern as shown below.
x
DISTANCE
E Q U A L S
D I S P L AY
HEIGHT
DISPLAY
HEIGHT
LOWER HORIZONTAL RAIL
UPPER HORIZONTAL RAIL
O
U
N
FRONT