Peerless-AV WL-ESA763PU-200 - Installation - Manual (Page 12)

12 of 25 ISSUED: 08-24-12 SHEET #: 180-9034-2 10-30-12
Remove four 1/4-20 x .6" screws using 5mm allen wrench
(I) and loosen two 1/4-20 x 1.25" screws 1/2 turn to allow for
display bracket adjustment.
Remove four 1/4-20 self tapping screws to detach display brackets from outer mount holes of universal adapter
bracket (B) using 5mm allen wrench (I) as shown in fi gure 6.1. Reinstall four 1/4-20 self tapping screws to secure
display brackets to inner set of mounting holes on universal adapter bracket (B) as shown in fi gure 6.2.
1/4-20 SELF
TAPPING SCREWS
1/4-20 SELF
TAPPING SCREWS
DISPLAY
BRACKETS
DISPLAY
BRACKETS
INNER
MOUNTING
HOLES
OUTER
MOUNTING
HOLES
fi g. 6.1
fi g. 6.2
Enclosure Installation
VESA 200 x 200 or VESA 200 x 100 Mounting Pattern
To prevent scratching the display, set a cloth on a
fl at, level surface that will support the weight of the
display. Place display face side down and place
universal adapter bracket (B) onto display.
6-1
6
B
B
B
1/4-20 x .6" SCREWS
1/4-20 x 1.25" SCREWS