Jk m or l – Peerless-AV HLGP432-C450-SM-Q10 - Installation User Manual
Page 5
5 of 5
ISSUED: 05-25-10 SHEET #:125-9113-3 09-15-11
6
fig 6.1
fig 6.2
G
DISPLAY
DISPLAY
DISPLAY BASE STAND
NOTE: Display and base stand may appear
different than illustrated
NOTE: Screws are installed at a diagonal.
Installation of Security Screws for Base to Display Attachment
J
K
M or L
Thread two M4 x 16 phillips pan trilobe screws (
G) to top left and bottom right attachment holes as shown in fig.
6.1. Remove the two M4 x 16 phillips pan trilobe screws (
G) and attach display to base stand
using two M4 x 16
mm socket pin serrated washer head screws (
L) or M4 x 12 mm socket pin screws (M), #8 split lock washers (J),
and M4 flat washers (
K).
NOTE: Use screws supplied with the display as a length reference when choosing screws (M or L).
Tighten with 4 mm security allen wrench (
N). Use TV supplied screws for remaining holes
.
© 2011, Peerless Industries, Inc. All rights reserved.
All other brand and product names are trademarks or registered trademarks of their respective owners.