Peerless-AV WL-SR560M-200 - Installation - Manual (Page 15)

15 of 19 ISSUED: 08-24-12 SHEET #: 180-9037-2 10-30-12
Untie the wireless receiver power adapter cord and route as shown below. Plug the end of the power adapter into
the outlet marked DC on the wireless receiver as shown in detail 6. Coil up the excess cord and secure with a
cable tie (HH). Store the coiled cord between the power adapter and the power module wall as shown. 18
DC
LAN
USB
DETAIL 6
WIRELESS RECEIVER POWER
ADAPTER
DISPLAY NOT
SHOWN FOR
CLARITY
Wireless Receiver Assembly and Power Module Assembly Setup
Remove the two #8 screws securing the cover of the wireless receiver assembly (AA) as shown in detail 4. Open
the enclosure to expose the wireless receiver and IR unit. Remove the M5 x 10mm phillips screws and open the
power module assembly (BB) as shown in detail 5. 17
DETAIL 4 DETAIL 5
#8 SCREW
M5 X 10mm SCREWS
AA
BB